... | ... | @@ -10,7 +10,7 @@ Comments in #1961: |
|
|
* At least one of the devices is running Android 6 or higher and has/has not previously added a contact nearby, therefore has/has not requested the location permission
|
|
|
* Start the connect via Bluetooth workflow, then after accepting the system Bluetooth discoverability dialog, quickly return to the contact list and try to add a contact nearby, and vice versa
|
|
|
|
|
|
Scenario 1 - two devices with new Briar installation, no contacts on either. They connect via distance connection (exchanging codes)
|
|
|
**Scenario 1 - two devices with new Briar installation, no contacts on either. They connect via distance connection (exchanging codes)**
|
|
|
|
|
|
Devices used: Samsung Mini API19 and Nokia 3.1 API29 (Android 10)
|
|
|
|
... | ... | @@ -34,12 +34,34 @@ Expected results: |
|
|
- [ ] Contacts are shown as online
|
|
|
- [ ] Contacts can send messages to each other
|
|
|
|
|
|
Scenario2: Verify that bluetooth connection can be made when bluetooth setting in Briar app is OFF.
|
|
|
**Scenario2: Verify that bluetooth connection can be made when bluetooth setting in Briar app is OFF.**
|
|
|
|
|
|
Repeat the same scenario as in Scenario1, with Bluetooth setting in the Briar app = OFF
|
|
|
|
|
|
Expected results:
|
|
|
- [ ] as in Scenario1, but also, the bluetooth setting in Briar app has been changed to ON during this process
|
|
|
|
|
|
**Scenario3: Verify that bluetooth connection can be made when bluetooth setting in the device itself as well as in the Briar app is OFF.**
|
|
|
|
|
|
**Scenario4: Verify that bluetooth connection can be made when bluetooth setting in the device itself as well as in the Briar app is OFF + Briar does not have access to location in permissions manager.**
|
|
|
|
|
|
**Scenario5: Add nearby contact via bluetooth, then go to 'Connect via bluetooth' for that contact
|
|
|
|
|
|
**Scenario6: Add nearby contact via bluetooth, then switch the bluetooth off in Briar app settings, then go to 'Connect via bluetooth' for that contact
|
|
|
|
|
|
**Scenario7: Add nearby contact via bluetooth, then switch the bluetooth off in Briar app settings, then go to 'Connect via bluetooth' for that contact
|
|
|
|
|
|
**Scenario6: Delete one contact added by bluetooth, and connected via bluetooth, and try to add it again via bluetooth
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
... | ... | |